1982 Honda Air and Fuel Delivery Parts

Choose a Model for your 1982 Honda

Accord Civic Prelude

Showing 1 - 10 of 11 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1982 Honda Civic Fuel Tank Cap 4 Cyl 1.3L Motorad

Locking Fuel Cap
Vented Black Cap
Locking
Product Attributes:
- Vented: Yes
- Lockable: Yes
- Tethered: No
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

This Part Fits the Following OEM/Substitute Numbers:

10582, 11582, 12F14L, 31761, 40782, 5782, 703-1841, 9MGC782, G782, MGC782, MGC782SK, P5782

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1982 - Honda Civic	L	1335	4 Cyl 1.3L	-

5 In Stock

$41.64 CAD

$49.97 CAD

Brand	Motorad
Part #	C97MGC782
Condition	New
Warehouse	B

1982 Honda Prelude Electric Fuel Pump Mr Gasket

For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
Electric Fuel Pump
Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:

Vehicle
1982 - Honda Prelude

75 In Stock

$87.56 CAD

$105.07 CAD

Brand	Mr Gasket
Part #	G1242S
Condition	New
Warehouse	B

1982 Honda Prelude Electric Fuel Pump Mr Gasket

For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;CARB E.O. D-550-34
Electric Fuel Pump; For Use w/Carburetor; Import; 2-3.5 psi; 42 gph; This Is Not An OEM Replacement Part;
Electric Fuel Pump
Product Attributes:
- Hose Size: 0.3125 In.
- Maximum PSI: 3.5
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inlet Size: 0.125 In. Npt
- Free Flow GPH: 28
- Item Weight: 1.200 Lbs.
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flow rate is 28 gallons per hour (GPH) at 2 to 3-1/2 pounds per square inch (PSI). Universal design for most import 4 & 6-cylinder carburetor applications. Please see part #12S for V8 gasoline applications, part #12D for diesel applications or part #12E for Ethanol, Methanol, E85 and Race Fuel applications. Solid-state worry free electronics. Eliminates vapor lock and flooding. Works well as a fuel transfer, booster, or stand-alone pump. Not recommended for diesel, methanol, ethanol, E85 or race fuel applications!!

Additional Fitment Information:

Vehicle
1982 - Honda Prelude

75 In Stock

$87.56 CAD

$105.07 CAD

Brand	Mr Gasket
Part #	G1242S
Condition	New
Warehouse	B

1982 Honda Civic Fuel Tank Drain Seal Ishino Stone

1982 Honda Civic Fuel Tank Drain Seal Ishino Stone

OEM Product: This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Aluminum 12mm Washer, Drain Plug 12x18mm - Fuel Tank Drain Plug
Aluminum 12MM
This Product Must be Purchased in Quantities of : 10
- You must purchase this item in multiples of 10. Your order will be delayed and possibly canceled if another amount is specified.

Additional Fitment Information:

Vehicle	Sub Model
1982 - Honda Civic	1500 GL

100 In Stock

$5.64 CAD

$6.77 CAD

Brand	Ishino Stone
Part #	ISH1644363
Condition	New
Warehouse	A

1982 Honda Prelude Fuel Filter Mahle

Original
Main - 2-Line - Located near Fuel Pump
Main filter (near fuel tank).

Additional Fitment Information:

Vehicle
1982 - Honda Prelude

Brand	Mahle
Part #	MAH1641701
Condition	New
Warehouse	A

1982 Honda Accord Fuel Filter Mahle

Original
Main - 2-line - Located near Fuel Tank
Main filter (near fuel tank).

Additional Fitment Information:

Vehicle
1982 - Honda Accord

Brand	Mahle
Part #	MAH1641701
Condition	New
Warehouse	A

1982 Honda Accord Carburetor Repair Kit Royze

1982 Honda Accord Carburetor Repair Kit Royze

Additional Fitment Information:

Vehicle
1982 - Honda Accord

Brand	Royze
Part #	ROY1617157
Condition	New
Warehouse	A

1982 Honda Civic Fuel Tank Cap CARQUEST

OE Equivalent
Non-Locking

Additional Fitment Information:

Vehicle	Sub Model
1982 - Honda Civic	1500 GL

Brand	CARQUEST
Part #	CQT1638681
Condition	New
Warehouse	A

1982 Honda Prelude Air Filter Denso

First Time Fit

Additional Fitment Information:

Vehicle
1982 - Honda Prelude

Brand	Denso
Part #	ND2039993
Condition	New
Warehouse	A

1982 Honda Prelude Air Filter K&N

Replacement Air Filter
Round; H-2 3/16 in.; ID-8.5 in.; OD-10.5 in.
K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s 10-Year/Million Mile Limited Warranty.
Air Filter
Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.700 Lbs. (0.8 Kg)
- Machine Washable: Yes
- Product Box Height: 3.630 In. (92mm)
- Filter Material: Cotton Gauze
- Inside Diameter: 8.500 In. (216mm)
- Product Box Width: 12.250 In. (311mm)
- Product Box Length: 12.250 In. (311mm)
- Outside Diameter: 10.500 In. (267mm)
- Item Height: 2.188 In. (56mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: None
- Top Style: Open
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Package Contents: 1 Air Filter
- Top Material: None
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: N/a
- Shape: Round
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 0.92 Oz (27 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Package Type: Box
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:

030523603, 0421164, 17220689003, 42912, 87349, A1207, A216, A40016, A704C, AF307, AF807, C29631, CA2740, DA307, FA676, HPR2740, MA16, PA2075...VIEW MORE

Additional Fitment Information: