1973 GMC Yukon Gear Parts

Choose a Model for your 1973 GMC

C15/C1500 Pickup C15/C1500 Suburban C25/C2500 Pickup C25/C2500 Suburban C35/C3500 Pickup G15/G1500 Van G25/G2500 Van G35/G3500 Van Jimmy K15/K1500 Pickup K15/K1500 Suburban K25/K2500 Pickup K25/K2500 Suburban K35/K3500 Pickup P15/P1500 Van P25/P2500 Van P35/P3500 Van Sprint

Showing 1 - 10 of 22 products

Sort:

Show:

Image

SKU

Product

Rating

Price

1973 GMC K15/K1500 Suburban Spider Gear Yukon Gear

Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline.
Dana 44; 30 Splines Dana 44; Standard Rotation; 30 Splines~Dura Grip Posi Carrier Gear Kit
Yukon Positraction internals for Dana 44 Dura Grip Posi; 30 spline. Does not include clutches. Does NOT fit Trac Loc or Power Lok. Fits Dura Grip ONLY.
Spider Gear Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 44 w/Dura Grip Positraction
- Spider Gear Kit
- Includes Two Side Gears
- Four Pinion Gears
- Cross Pin Shaft
- Roll Pin And Spider Gear Thrust Washers
Yukon Gear & Axle spider gear kits utilize the highest quality materials and best production techniques in the industry to ensure a longer lasting spider gear set. Kit delivers everything needed for a complete and proper spider gear set replacement.

Additional Fitment Information:

Vehicle
1973 - GMC K15/K1500 Suburban

1 In Stock

$550.28 CAD

$660.34 CAD

Brand	Yukon Gear
Part #	Y11YPKD44-P-30
Condition	New
Warehouse	B

1973 GMC G15/G1500 Van Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Rear Axle Bearing/Seal Kit for Various Differentials
8.8 in./8.5 in./8.6 in. 10 Bolt; AMC 35; Torrington Brand; 2.530 in. OD. GM 12 Bolt Truck; Torrington Brand; 2.530 in. OD.
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.530 in. Outer Diameter
- 1.618 in. Inner Diameter
Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1973 - GMC G15/G1500 Van	Rear

14 In Stock

$45.90 CAD

$55.08 CAD

Brand	Yukon Gear
Part #	Y11AK 1559
Condition	New
Warehouse	B

1973 GMC C15/C1500 Suburban Drive Axle Shaft Seal - Rear 8 Cyl 7.4L Yukon Gear

Axle seal; for 1559 OR 6408 bearing
559 Or 6408 Bearing; Not Coarse Spline GM 12 Bolt Truck; 559 Or 6408 Bearing; Not Coarse Spline
Axle seal; for 1559 OR 6408 bearing; NOT COARSE spline 12T.Yukon Mighty seal.
Yukon Mighty Axle Seal
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- 2.530 in. OD
- Rear Axle Seal
Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1973 - GMC C15/C1500 Suburban	V	7441	Rear	8 Cyl 7.4L	454

2 In Stock

$11.21 CAD

$13.45 CAD

Brand	Yukon Gear
Part #	Y11YMS8835S
Condition	New
Warehouse	B

1973 GMC K35/K3500 Pickup Axle Hub Flange 6 Cyl 4.8L Yukon Gear

Yukon Hardcore Drive Flange Kit Dana 60 35spl Outer Stubs w/Non-Engraved Caps
35 Spline Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs; non-engraved caps
Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs. Non-engraved caps.
Yukon Hardcore Flange Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 60 w/35 Spline Outer Axles
- Drive Flange Kit
- Includes Two Drive Flanges
- Two Caps And All Necessary Hardware
Yukon Hardcore Drive Flange Kits provide the ultimate in strength and performance for serious off-road applications. This kit contains everything needed to replace your internal manual locking hubs and fortify your drivetrain against damage.

Additional Fitment Information:

Vehicle	Block	CC	Engine	CID
1973 - GMC K35/K3500 Pickup	L	4786	6 Cyl 4.8L	292

1 In Stock

$554.61 CAD

$665.53 CAD

Brand	Yukon Gear
Part #	Y11YHC50006
Condition	New
Warehouse	B

1973 GMC G25/G2500 Van Differential Side Bearing Spacer Yukon Gear

Yukon Positraction Shim kit GM 8.2in.; GM 8.5in.; 12T; 12P; 8.8in./Cast Iron Vet
8.875 in. 12 Bolt; 8.8 in. 10 Bolt GM 12 Bolt Truck; Dura Grip Posi Shim Kit
Yukon Positraction shim kit (12 shims) for GM 8.2in.; GM 8.5in./8.6in.; 12T; 12P; Ford 8.8in./Cast Iron Vette
Positraction Shim Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Ford 8.8 in.
- 1963-1979 Corvette
- GM 12 Bolt Passenger Car/Truck
- 8.2 in./8.5 in./8.6 in. Dura Grip Positraction
- Shim Kit
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.

Additional Fitment Information:

Vehicle
1973 - GMC G25/G2500 Van

2 In Stock

$45.21 CAD

$54.25 CAD

Brand	Yukon Gear
Part #	Y11YPKGM12-PC-SHIM
Condition	New
Warehouse	B

1973 GMC K35/K3500 Pickup Differential Pinion Bearing Kit Yukon Gear

Yukon Pinion install kit for Dana 60 front differential
Dana 60/Reverse/Irregular Cover; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable Dana 60; Standard Rotation; Includes Timken Pinion Bearings/Races/Pilot Bearing If Applicable/Crush Sleeve If Applicable
Yukon Pinion installation kits are a great solution for gear installation on lower mileage vehicles where the carrier bearings/races can be reused. This kit uses Timken bearings/races along with a high quality pinion seal/small parts
Pinion Install Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Arsenic; Which Is Known To The State Of California To Cause Cancer. For More Information; Go To Www.p65warnings.ca.gov.
Features:
- Fits Dana Spicer 60 Front
- Includes Are Pinion Bearings/Races
- Pinion Seal
- Crush Sleeve
- Complete Pinion Shim Kit
- And Marking Compound w/Brush
Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.

Additional Fitment Information:

Vehicle
1973 - GMC K35/K3500 Pickup

1 In Stock

$342.47 CAD

$410.96 CAD

Brand	Yukon Gear
Part #	Y11PK D60-F
Condition	New
Warehouse	B

1973 GMC K15/K1500 Suburban Differential Side Bearing Spacer Yukon Gear

Yukon Positraction Shim kit GM 8.2in.; GM 8.5in.; 12T; 12P; 8.8in./Cast Iron Vet
8.875 in. 12 Bolt; 8.8 in. 10 Bolt GM 12 Bolt Truck; Dura Grip Posi Shim Kit
Yukon Positraction shim kit (12 shims) for GM 8.2in.; GM 8.5in./8.6in.; 12T; 12P; Ford 8.8in./Cast Iron Vette
Positraction Shim Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Ford 8.8 in.
- 1963-1979 Corvette
- GM 12 Bolt Passenger Car/Truck
- 8.2 in./8.5 in./8.6 in. Dura Grip Positraction
- Shim Kit
Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set.

Additional Fitment Information:

Vehicle
1973 - GMC K15/K1500 Suburban

2 In Stock

$45.21 CAD

$54.25 CAD

Brand	Yukon Gear
Part #	Y11YPKGM12-PC-SHIM
Condition	New
Warehouse	B

1973 GMC K15/K1500 Suburban Drive Axle Shaft Seal - Rear 8 Cyl 5.7L Yukon Gear

Axle seal; for 1559 OR 6408 bearing
559 Or 6408 Bearing; Not Coarse Spline GM 12 Bolt Truck; 559 Or 6408 Bearing; Not Coarse Spline
Axle seal; for 1559 OR 6408 bearing; NOT COARSE spline 12T.Yukon Mighty seal.
Yukon Mighty Axle Seal
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- 2.530 in. OD
- Rear Axle Seal
Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
1973 - GMC K15/K1500 Suburban	V	-	Rear	8 Cyl 5.7L	350

2 In Stock

$12.15 CAD

$14.58 CAD

Brand	Yukon Gear
Part #	Y11YMS8835S
Condition	New
Warehouse	B

1973 GMC K15/K1500 Suburban Drive Axle Shaft Bearing Kit - Rear Yukon Gear

Yukon Rear Axle Bearing/Seal Kit for Various Differentials
8.8 in./8.5 in./8.6 in. 10 Bolt; AMC 35; Torrington Brand; 2.530 in. OD. GM 12 Bolt Truck; Torrington Brand; 2.530 in. OD.
Yukon axle bearing/seal kits are specially designed for each application/use all high quality bearings/seals.
Axle Bearing/Seal Kit
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Includes Axle Bearing And Seal
- Services One Side
- 2.530 in. Outer Diameter
- 1.618 in. Inner Diameter
Yukon axle bearing and seal kits are specially designed for each application and use high-quality bearings and seals.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
1973 - GMC K15/K1500 Suburban	Rear

14 In Stock

$44.63 CAD

$53.56 CAD

Brand	Yukon Gear
Part #	Y11AK 1559
Condition	New
Warehouse	B

1973 GMC K35/K3500 Pickup Axle Hub Flange 6 Cyl 4.8L Yukon Gear

Yukon Hardcore Drive Flange Kit Dana 60 35spl Outer Stubs w/Non-Engraved Caps
35 Spline Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs; non-engraved caps
Yukon hardcore drive flange kit for Dana 60; 35 spline outer stubs. Non-engraved caps.
Yukon Hardcore Flange Set
Product Attributes:
- WARNING CA Proposition 65: No
Features:
- Fits Dana Spicer 60 w/35 Spline Outer Axles
- Drive Flange Kit
- Includes Two Drive Flanges
- Two Caps And All Necessary Hardware
Yukon Hardcore Drive Flange Kits provide the ultimate in strength and performance for serious off-road applications. This kit contains everything needed to replace your internal manual locking hubs and fortify your drivetrain against damage.