2010 Jeep ICON Vehicle Dynamics Parts

Choose a Model for your 2010 Jeep

Wrangler

Showing 1 - 10 of 54 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2010 Jeep Wrangler Coil Spring Set - Rear ICON Vehicle Dynamics

The ICON Vehicle Dynamics 2007-2018 Jeep Wrangler JK 2" lift REAR coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel and the fitment of larger tires.
07-18 JK REAR 2" DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Spring Color: Black
- Rear Spring Rate Type:
  - Progressive Dual Rate
  - Variable
- Rear Spring Seat Included: Yes
- Grade Type: Performance
- Maximum Lift Height: 2
- Bump Stops Included: No
- Title: Icon 2007-2018 Jeep Jk Wrangler, 2” Lift, Rear, Dual Rate Coil Spring Kit
- Spring Material: Steel
Features:
- 2" lift height over stock
- Increase in wheel travel when paired with ICON shocks
- Dual rate coil springs improve on and off-road ride quality over stock
- Lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
The ICON Vehicle Dynamics 2007-2018 Jeep Wrangler JK 2" lift rear coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JK coil springs provide 2" of front lift height over stock and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2007-2018 Jeep Wrangler JK.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Rear

4 In Stock

$399.65 CAD

$479.58 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322015
Condition	New
Warehouse	B

2010 Jeep Wrangler Coil Spring Set - Front ICON Vehicle Dynamics

2007-2018 JEEP JK FRONT 4.5" LIFT DUAL-RATE SPRING KIT
07-18 JK FRONT 4.5" DUAL-RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Spring Color: Black
- Grade Type: Performance
- Maximum Lift Height: 4.5
- Title: 07-18 Jk Front 4.5" Dual-rate Spring Kit
- Front Spring Seat Included: No
- Spring Material: Steel
- Front Spring Rate Type: Variable

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Front

4 In Stock

$454.00 CAD

$544.80 CAD

Brand	ICON Vehicle Dynamics
Part #	I4324010
Condition	New
Warehouse	B

2010 Jeep Wrangler Shock Absorber - Front ICON Vehicle Dynamics

with 4.5" Suspension Lift
2007-2018 JK 4.5" LIFT FRONT 2.0 VS INTERNAL RESERVOIR SHOCK
07-18 JK 4.5" FRONT 2.0 VS IR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 07-18 Jk 4.5" Front 2.0 Vs Ir
- Bushing Material: Polyurethane
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Front

10 In Stock

$354.35 CAD

$425.22 CAD

Brand	ICON Vehicle Dynamics
Part #	I4326517
Condition	New
Warehouse	B

2010 Jeep Wrangler Suspension Control Arm Kit - Rear Upper ICON Vehicle Dynamics

2007-2018 JEEP JK REAR UPPER FIXED LINK KIT
07-18 JK REAR UPPER FIXED LINK KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Control Arm Material: Dom Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: No
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-18 Jk Rear Upper Fixed Link Kit
- Control Arm Color: Black
- Bushing Material: Polyurethane
Features:
- Dual stage powder coat for excelled corrosion resistance
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
ICON’s tubular steel rear upper link arms for the Jeep Wrangler JK are a significant upgrade over the factory units due to increases in strength and suspension performance. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This rear upper link arm kit features multi durometer bushings that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The increased range of motion provided by these bushings allows the suspension function as intended, without the bushing bind that limits the vehicle in stock form.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Rear Upper

3 In Stock

$557.94 CAD

$669.53 CAD

Brand	ICON Vehicle Dynamics
Part #	I4321046
Condition	New
Warehouse	B

2010 Jeep Wrangler Coil Spring Set - Front ICON Vehicle Dynamics

Use Up To 33 (in) x 11.50 (in) Tires Front Raise Height 3 (in) Up to 35 (in) Tire with Minor Fender Trimming ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle. Recommended Aftermarket Wheel Size: 17x8.5" with 4.5” Backspace / -6mm Offset
The ICON Vehicle Dynamics 2007-2018 Jeep Wrangler JK 3" lift coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel and the fitment of larger tires.
07-18 JK FRONT 3" DUAL RATE SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Spring Color: Black
- Grade Type: Performance
- Maximum Lift Height: 3
- Title: 07-18 Jk Front 3" Dual Rate Spring Kit
- Front Spring Seat Included: No
- Spring Material: Steel
- Front Spring Rate Type: Variable
Features:
- 3" lift height over stock
- Fits 33" tires (35" with optional aftermarket high clearance fenders)
- Increase in wheel travel when paired with ICON shocks
- Dual rate coil springs improve on and off-road ride quality over stock
- Lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
The ICON Vehicle Dynamics 2007-2018 Jeep Wrangler JK 3" lift coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON Jeep JK coil springs provide 3" of front lift height over stock and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2007-2018 Jeep Wrangler JK.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Front

3 In Stock

$399.65 CAD

$479.58 CAD

Brand	ICON Vehicle Dynamics
Part #	I4322010
Condition	New
Warehouse	B

2010 Jeep Wrangler Suspension Shock Absorber - Rear ICON Vehicle Dynamics

with 4.5" Suspension Lift
2007-2018 JK 4.5" LIFT REAR 2.0 VS INTERNAL RESERVOIR SHOCK
07-18 JK 4.5" REAR 2.0 VS IR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Barpin
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Center Of Eyelet
- Title: 07-18 Jk 4.5" Rear 2.0 Vs Ir
- Bushing Material: Polyurethane
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Rear

10 In Stock

$354.35 CAD

$425.22 CAD

Brand	ICON Vehicle Dynamics
Part #	I4326518
Condition	New
Warehouse	B

2010 Jeep Wrangler Suspension Track Bar - Rear ICON Vehicle Dynamics

2007-2018 JEEP JK REAR ADJUSTABLE TRACK BAR KIT
07-18 JK REAR ADJ TRACK BAR KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Bushing
- Greaseable: Yes
- Bushings Included: Yes
- Grease Fitting Included: Yes
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Title: 07-18 Jk Rear Adj Track Bar Kit
- Bushing Material: Polyurethane
- Service Parts: 614513 - 21020/21025 Bushing & Sleeve Service Kit
Features:
- Track Bars include Dual Stage Bushing System and JM12T Rod End to minimize deflection while maximizing responsiveness
- Easy install in to OEM mounts with application specific hardware
- On vehicle adjustable for precise track alignment
- Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
- Allows for full suspension articulation without binding
The ICON Adjustable Rear Track Bar for the 2007-2018 JK will work on any Jeep JK with 2.5 - 4.5" of lift. Upgrading your Jeep JK track bar is great for centering the rear axle allowing it to track perfectly under the vehicle vs. offset to the side. The ICON Adjustable Track Bar contains a dual stage Polyurethane / Delrin Bushing kit on one end that has minimal deflection and a rod end with our pinch bolt housing that allows on Jeep adjustability.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Rear

3 In Stock

$617.10 CAD

$740.52 CAD

Brand	ICON Vehicle Dynamics
Part #	I4321025
Condition	New
Warehouse	B

2010 Jeep Wrangler Suspension Control Arm Kit - Front Upper ICON Vehicle Dynamics

2007-2018 JEEP JK FRONT UPPER ADJUSTABLE LINK KIT
07-18 JK FRONT UPPER ADJ LINK KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushings Included: Yes
- Control Arm Material: Dom Steel
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Title: 07-18 Jk Front Upper Adj Link Kit
- Control Arm Color: Black
- Bushing Material: Rod End Bearing
Features:
- PTFE-lined rod end
- Adjustable in length for front caster angle adjustment
- Offers controlled deflection with maximum articulation and responsiveness
- Easy install into OEM mounts with application specific hardware
- High quality powder coat finish
ICON’s tubular steel ront upper link arms are a significant upgrade over the factory units due to increases in strength, adjustability, and performance. These components are made from CNC machined 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This front upper link arm kit features PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and link arm length adjustment. The quality rod ends featured in these link arms allow the vehicle’s suspension to function as intended, without the bushing bind that limits the vehicle in stock form.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Front Upper

2 In Stock

$506.77 CAD

$608.12 CAD

Brand	ICON Vehicle Dynamics
Part #	I4321036
Condition	New
Warehouse	B

2010 Jeep Wrangler Shock Absorber - Front ICON Vehicle Dynamics

Used with 2" to 3" Lift
2007-218 JK 2-3" LIFT FRONT 2.0 VS NON RESERVOIR SHOCK
07-18 JK 2-3" FRONT 2.0 VS NR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eyelet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 07-18 Jk 2-3" Front 2.0 Vs Nr
- Bushing Material: Polyurethane
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range.
- 100% revalveable
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position
2010 - Jeep Wrangler	Front

7 In Stock

$359.94 CAD

$431.93 CAD

Brand	ICON Vehicle Dynamics
Part #	I4326519
Condition	New
Warehouse	B

2010 Jeep Wrangler Suspension Track Bar - Front ICON Vehicle Dynamics

This ICON adjustable track bar will allow the proper alignment of your lifted truck’s steering geometry, delivering increased strength, control, and proper axle positioning while reducing stress on related steering components.
07-18 JK FRONT ADJ TRACK BAR KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- End 1 Type: Bushing
- Greaseable: Yes
- Bushings Included: Yes
- Grease Fitting Included: Yes
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Title: 07-18 Jk Front Adj Track Bar Kit
- Bushing Material: Polyurethane
- Service Parts: 614513 - 21020/21025 Bushing & Sleeve Service Kit
Features:
- Track Bars include Dual Stage Bushing System and JM12T Rod End to minimize deflection while maximizing responsiveness
- Easy install into OEM mounts with application specific hardware
- On vehicle adjustable for precise track alignment
- Constructed with CNC machined and bent 1 1/4" x .250 wall 1026 seamless DOM tubing
- Allows for full suspension articulation without binding
The ICON Adjustable Front Track Bar for the 2007-2018 JK will work on any Jeep JK with 2.5 - 4.5" of lift. Upgrading your Jeep JK track bar is great for centering the front axle, allowing it to track perfectly under the vehicle vs. offset to the side. The ICON Adjustable Track Bar contains a dual stage Polyurethane / Delrin Bushing kit on one end that has minimal deflection, and a rod end with our pinch bolt housing that allows on Jeep adjustability.