1998 Dodge Transmission Parts


Showing 1 - 10 of 276 products
Image
SKU
Product
Rating
Price

Timken
  • Tapered Roller Bearing Cone and Cup Assembly
  • Front Center Shaft
  • Both the inner (cone) and outer (cup) should be replaced at the same time to maximize reliability and life
  • Suggested Purchase Quantity: 2
    • Most jobs typically require 2 of this item.

Additional Fitment Information:
Vehicle Trans Type Transmission Trans. Speed
1998 - Dodge Viper Transmission Manual 6

Dorman
  • Transmission Pan With Drain Plug
  • Bottom Pan
  • Product Attributes:
    • Capacity: 9.5
    • Grade Type: Regular
    • Mounting Hardware Included: No
    • Package Contents: Transmission Pan
    • Maximum Depth: 2.05
    • Mounting Hole Diameter: 9.2
    • Configuration: One Piece
    • Gasket Configuration: One Piece
    • Length: 12.5
    • Width: 12.5
    • Mounting Hole Quantity: 15
    • Drain Thread Diameter: 12
    • Dipstick Port: No
    • Minimum Depth: 1.8
    • Maximum Width: 12.5
    • Drain Plug Included: Yes
    • Thickness: 2.3
  • Features:
    • Ideal replacement - this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement
    • Durable construction - this transmission oil pan is made of quality materials for durability and leak-free performance
    • Cost-effective solution - offers original equipment performance at competitive price
    • Quality tested - this part has undergone try-on testing to ensure a quality fit
  • This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it's designed for reliable, leak-free service.

This Part Fits the Following OEM/Substitute Numbers:
103161, 4431997, 4431997AC

Additional Fitment Information:
Vehicle Transmission Manuf. Code
1998 - Dodge Caravan 41AE

Centerforce
  • Dual Friction(R); Clutch Pressure Plate and Disc Set
  • 10.4 in. Dia.; 2 Bolt Pattern; 10 Spline; 1 1/8 in. Input Shaft; 521 ft/lbs Torque; Includes Pressure Plate/Disc/Alignment Tool
  • The Centerforce Dual Friction(R) Clutch Series uses patented technologies for an ultimate pressure plate and disc combination.
  • Dual Friction® Clutch Pressure Plate And Disc Set
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
  • Features:
    • Patented Centrifugal Weight Design [where Applicable]
    • Patented Dual Friction[r] Design
    • Patented Ball Bearing Pressure Plate [where Applicable]
    • Light Pedal Effort
    • High Quality Friction Material
    • Increased Holding Capacity
    • Smooth Engagement
  • The Centerforce(R) Dual Friction(R) Clutch Series is a performance matched pressure plate & disc combination featuring the patented Centerforce centrifugal weight system (where applicable) and specialized machining processes to provide a performance clutch that offers exceptional street characteristics, while offering outstanding holding-capacity and durability. Furthermore, the Centerforce Dual Friction disc has an organic full facing on one side for longevity and an organic segmented facing on the other side providing increased holding capacity. Some applications have the organic segmented facings of both sides. The Dual Friction clutch is engineered for those who are looking for the ultimate in street/strip holding power and performance without sacrificing pedal effort and driver control. While the Dual Friction has been engineered primarily as a street clutch it can be used in mild competition applications.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1998 - Dodge Dakota V 3906 6 Cyl 3.9L SLT 239

ATS Diesel Performance
  • SFI approved billet flexplates from ATS will hold up under the most extreme conditions. ATS billet flexplates are SFI approved, meaning that they stand up to the toughest race application standards. These are crafted out of strong billet steel allowing your transmission to shift faster and harder with out running the risk of breaking the flexplate. The added strain of racing your high horsepower truck is put directly onto the flexplate, giving it much more pressure than the factory settings ever intended. The added strength allows this high-stress situation to be overcome, and transfer all those ponies to the wheels.
    Details: Dodge Billet Flex Plate, 1989 - 2007 47RH/47RE/48RE Fits stock and aftermarket converters Solves common breakage issues Meets SFI standards Strong, durable and reliable Made From Billet Steel Sold As A Kit SKU: 3059002104 Fits Vehicles: 1989-2007 Dodge Ram 2500/3500 w/5.9L Cummins w/47RH/47RE/48RE Transmission Note: For use with 1989-1993 Dodge 5.9L, you must install a flat back style of torque converter such as our ATS Heavy Duty Billet Torque Converter (Non Lock-Up), 1990-93 Dodge with 518 Automatic.

Additional Fitment Information:
Vehicle Sub Model
1998 - Dodge Ram 3500 Base

ATS Diesel Performance
  • 1996-Early 1999 Dodge Governor pressure sensor/switch transducer.Serving truck enthusiasts for nearly two decades, ATS invents, designs, manufactures, and sells the world's most innovative diesel truck performance products-over 600 products for one-stop shopping. Whether you need power and efficiency for towing, off-road, recreation, or racing, ATS Diesel Performance can meet your needs, quickly and at a reasonable cost.Features:Connector Type:4-Pin RoundEngine Manufacturer: CumminsMake: Dodge DieselModels: 2500/3500Fuel Type: DieselSold As: Each

Additional Fitment Information:
Vehicle Sub Model
1998 - Dodge Ram 3500 Base

BD Diesel
  • 12-Valve; Includes Pin Retainer/Crankshaft Seal/Dowel Pin/Crankshaft Gasket
  • Killer Dowel Pin Repair Kit; 12-Valve; Includes Pin Retainer/Crankshaft Seal/Dowel Pin/Crankshaft Gasket;
  • Killer Dowel Pin Repair Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • OEM Dowel Pin Located Behind Timing Cover Can Become Loose
    • Loose Dowel Pin Can Drop Down And Cause Extensive Damage
    • Kit Gives Everything Needed To Replace Pin w/Permanent Solution
    • 12 Month Or 12000 Mile Warranty
  • This kit gives everything needed to replace the pin with a more permanent solution before it leaves your truck down.

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Dodge Ram 3500 L - 6 Cyl 5.9L 359

BD Diesel
  • 1500 lb. Per Foot Torque; Forged Billet; Black
  • Flexplate; 1500 lb. Per Foot Torque; Forged Billet; Black;
  • Flexplate
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning Cancer And Reproductive Harm Www.p65warnings.ca.gov
  • Features:
    • Meets SFI 29.3 Approval
    • Reliably Handle Up To 1500 lb-ft. Of Torque
    • Twice The Material Of The Stock Flex Plate
    • Precision Balanced
    • Black Oxide Coated To Resist Corrosion
    • Black Oxide Coated Prevents Hydrogen Embrittlement
    • Allows Axial Thrust Unlike Solid Flywheel Conversions
    • Fit Any OEM or Aftermarket Torque Converter
    • Affordable Enough To Replace With Converter or Transmission Swap
    • Great For Racing/Towing or Stock!
    • 36 Month/150000 Mile Limited Warranty
  • The power and torque that modified 5.9L and 6.7L Cummins engines deliver can crack or even shatter the stock flex plate. BDs FleX-Plate is designed specifically for modified applications, and can reliably handle up to 1,500 lb.-ft. of torque. Twice as thick as the stock unit and made from forged steel, the BD FleX-Plate is precision-balanced and SFI-certified for use in race sanctioning bodies. Plus, a new black oxide coating resists corrosion, and prevents hydrogen embrittlement that can cause cracking. The BD FleX-Plate is a direct, bolt-in replacement for the stock converter and is also compatible with most aftermarket torque converters. Great for stock, towing or racing applications!BD Flexplate now 29.3SFI Approval We are proud to announce that our BD Flexplate has now passed the newly created SFI 29.3 version testing. It is a much more stringent test for safety than the old 29.1. The 29.3 test is specific to the high horsepower Diesel motors only. This again points to the BD Flexplate as being the best in the industry.

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Dodge Ram 3500 L - 6 Cyl 5.9L 359

Dorman
  • Automatic Transmission Pan
  • Transmission Rear Cover
  • Product Attributes:
    • Shape: Molded Assembly
    • Mounting Hardware Included: No
    • Package Contents: Automatic Transmission Case Cover
    • Mounting Hole Diameter: 9.2
    • Configuration: One Piece
    • Length: 12.5
    • Width: 7.5
    • Mounting Hole Quantity: 11
    • Thickness: 1.7
  • Features:
    • Direct replacement - this automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles
    • Ideal solution - this cover is a reliable replacement for an original part that is missing or damaged
    • Durable construction - this part is made from quality materials to ensure reliable performance and long service life
    • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • This automatic transmission case cover is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

This Part Fits the Following OEM/Substitute Numbers:
04431699, 04567255, 04567566, 04659636, 103237, 4431699, 4567255, 4567566, 4659636

Additional Fitment Information:
Vehicle Transmission Manuf. Code
1998 - Dodge Caravan 41AE

Centerforce
  • Centerforce(R) I and II; Clutch Friction Disc
  • 10.4 in. Dia.; 10 Spline; 1 1/8 in. Input Shaft; Organic Friction
  • The Centerforce I and II Discs are made from full high-quality friction full facings. These discs are made for Centerforce I and II pressure plates.
  • Clutch Disc
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warnings: This Product Can Expose You To Chemicals Including Nickel Compounds And Dusts; Which Are Known To The State Of California To Cause Cancer. For More Information; Visit Www.p65warnings.ca.gov. Wash Hands Following Installation.
    • Diameter (in.): 10.400 In.
    • Spline Size: 1.03125 In. - 10
  • Features:
    • High Quality Friction Material
    • Smooth Engagement
  • Centerforce brings together high-quality friction materials and patented processes to give you top-of-the-line discs. Centerforce offers discs for the Centerforce I, Centerforce II, Dual Friction, LMC, and DFX series clutches. Each disc is designed to work best with a corresponding Centerforce pressure plate.

Additional Fitment Information:
Vehicle Block CC Engine Sub Model CID
1998 - Dodge Dakota V 3906 6 Cyl 3.9L SLT 239

Fram
  • FRAM, FT1206A, Transmission Filter Kit
  • Transmission Filter
  • FRAM
  • Product Attributes:
    • Cap Included: No
    • Shape: Rectangular
    • Terminal Type: Push
    • Terminal Gender: Male

This Part Fits the Following OEM/Substitute Numbers:
143, 6-1048, EV 223, MD183547, P1245, PC263, PCV177, PT38008, T1245

Additional Fitment Information:
Vehicle Block CC Engine CID
1998 - Dodge B3500 V - 8 Cyl 5.9L 360
Showing 1 - 10 of 276 products

Loading...