1962 Ford Mr Gasket Parts


Showing 1 - 10 of 22 products
Image
SKU
Product
Rating
Price

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1962 - Ford Country Sedan

Mr Gasket
  • For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
  • Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
  • Electric Fuel Pump
  • Product Attributes:
    • Hose Size: 0.3125 In.
    • Maximum PSI: 7
    • WARNING CA Proposition 65: Yes
    • Fuel Type: Gasoline
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inlet Size: 0.125 In. Npt
    • Fuel System Type: Carbureted
    • Free Flow GPH: 35
    • Item Weight: 0.750 Lbs.
  • Features:
    • Solid-state Worry Free Electronics
    • Internal Pressure Regulating
    • Universal Design Allows For Easy Installation
    • No Diaphragms Or Mechanical Parts To Wear Out
    • They Make An Excellent Fuel Transfer Pump
  • Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.

Additional Fitment Information:
Vehicle
1962 - Ford Country Sedan

Mr Gasket
  • 3/16 in. Thick; w/Locating Tabs
  • Valve Cover Gasket Set; 3/16 in. Thick; w/Locating Tabs;
  • Valve Cover Gasket Set
  • Product Attributes:
    • Valve Cover Gasket Material: Performance
    • WARNING CA Proposition 65: No
    • Valve Cover Gasket Thickness: 0.187 In.
    • Engine Make/Size: Ford Big Block Fe
    • Package Type: Retail - Skin Pack
  • Features:
    • Made From Cork/Rubber Compound
    • Can Be Reused Many Times
    • Thick Fuel Resistant
  • Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

This Part Fits the Following OEM/Substitute Numbers:
1632

Additional Fitment Information:
Vehicle Block CC Engine CID
1962 - Ford Galaxie V 6391 8 Cyl 6.4L 390

Mr Gasket
  • 3/16 in. Thick; w/Locating Tabs
  • Valve Cover Gasket Set; 3/16 in. Thick; w/Locating Tabs;
  • Valve Cover Gasket Set
  • Product Attributes:
    • Valve Cover Gasket Material: Performance
    • WARNING CA Proposition 65: No
    • Valve Cover Gasket Thickness: 0.187 In.
    • Engine Make/Size: Ford Big Block Fe
    • Package Type: Retail - Skin Pack
  • Features:
    • Made From Cork/Rubber Compound
    • Can Be Reused Many Times
    • Thick Fuel Resistant
  • Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Additional Fitment Information:
Vehicle Block CC Engine CID
1962 - Ford Country Squire V 5769 8 Cyl 5.8L 352

Mr Gasket
  • Thermocap™ Radiator Cap
  • Silver; OEM Replacement w/Thermometer Built In; 16 psi
  • Thermocap™ Radiator Cap; Silver; OEM Replacement w/Thermometer Built In; 16 psi;
  • Thermocap(TM) Radiator Cap
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Indicates Coolant Temperature
    • Helps To Prevent Coolant Injuries
    • Integrated Coolant Reclamation Valve
    • Improves Under-Hood Appearance
    • Fits Most Domestic Vehicles
    • Built-In Calibrated Thermometer
  • Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Additional Fitment Information:
Vehicle
1962 - Ford Falcon

Mr Gasket
  • Thermocap™ Radiator Cap
  • Silver; OEM Replacement w/Thermometer Built In; 16 psi
  • Thermocap™ Radiator Cap; Silver; OEM Replacement w/Thermometer Built In; 16 psi;
  • Thermocap(TM) Radiator Cap
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
  • Features:
    • Indicates Coolant Temperature
    • Helps To Prevent Coolant Injuries
    • Integrated Coolant Reclamation Valve
    • Improves Under-Hood Appearance
    • Fits Most Domestic Vehicles
    • Built-In Calibrated Thermometer
  • Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Additional Fitment Information:
Vehicle Block CC Engine CID
1962 - Ford Country Sedan V 4261 8 Cyl 4.3L 260

Mr Gasket
  • Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
  • Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
  • Exhaust Gasket Set
  • Product Attributes:
    • Gasket Line: Performance
    • WARNING CA Proposition 65: No
    • Port Shape: Rectangle
    • Collector Gaskets Included: No
    • Engine Make/Size: Ford Small Block Windsor
    • Thickness: 0.062 In.
    • Port Size: 1.120 In. X 1.480 In.
  • Features:
    • High-Temperature Exhaust Material
    • Withstands Extreme Exhaust Heat
    • Excellent Sealing Durability And Torque Retention
    • Superior Tensile Strength
  • Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

Additional Fitment Information:
Vehicle Block CC Engine CID
1962 - Ford Fairlane V 3622 8 Cyl 3.6L 221

Mr Gasket
  • Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.
  • Exhaust Gasket Set; Rectangle Port Shape; Port Dimensions W-1.12 in. x H-1.48 in.;
  • Exhaust Gasket Set
  • Product Attributes:
    • Gasket Line: Performance
    • WARNING CA Proposition 65: No
    • Port Shape: Rectangle
    • Collector Gaskets Included: No
    • Engine Make/Size: Ford Small Block Windsor
    • Thickness: 0.062 In.
    • Port Size: 1.120 In. X 1.480 In.
  • Features:
    • High-Temperature Exhaust Material
    • Withstands Extreme Exhaust Heat
    • Excellent Sealing Durability And Torque Retention
    • Superior Tensile Strength
  • Manufactured from high-temperature composite exhaust material. Provides maximum torque retention to eliminate gasket failure. Can be trimmed if necessary for modified port applications. Precision die cut for an excellent fit. For OE replacement, high-performance street, drag race and oval track.

This Part Fits the Following OEM/Substitute Numbers:
1415

Additional Fitment Information:
Vehicle Block CC Engine CID
1962 - Ford Fairlane V 3622 8 Cyl 3.6L 221

Mr Gasket
  • 9 in.; 10 Bolt
  • Differential Cover Gasket; Rear; 9 in.; 10 Bolt;
  • Differential Cover Gasket
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Thickness: 0.047 In.
  • Features:
    • Precision Cut
    • High-Quality Materials
    • Reusable
  • Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1957-1981 Ford 10 bolt 9 inch ring gear.

Additional Fitment Information:
Vehicle Position
1962 - Ford Econoline Rear

Mr Gasket
  • 9 in.; 10 Bolt
  • Differential Cover Gasket; Rear; 9 in.; 10 Bolt;
  • Differential Cover Gasket
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Thickness: 0.047 In.
  • Features:
    • Precision Cut
    • High-Quality Materials
    • Reusable
  • Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit. Fits 1957-1981 Ford 10 bolt 9 inch ring gear.

This Part Fits the Following OEM/Substitute Numbers:
2301

Additional Fitment Information:
Vehicle Position
1962 - Ford Econoline Rear
Showing 1 - 10 of 22 products

Loading...