2016 Lexus ICON Vehicle Dynamics Parts

Choose a Model for your 2016 Lexus

GX460

Showing 1 - 10 of 89 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2016 Lexus GX460 Coil Spring Set - Rear ICON Vehicle Dynamics

These ICON mult-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires.
07-UP FJ/03-UP 4RNR/03-UP GX REAR 2" SPRING KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Spring Color: Black
- Rear Spring Rate Type: Constant
- Rear Spring Seat Included: No
- Grade Type: Performance
- Maximum Lift Height: 2
- Title: 07-up Fj/03-up 4rnr/03-up Gx Rear 2" Spring Kit
- Spring Material: Steel
Features:
- Dual stage powder coat for long-lasting corrosion resistance
- ICON engineered coil spring guaranteed for life against sagging and breaking
- Easy install makes for a simple and cost effective upgrade
- Linear-rate coil allows for exceptional ride quality and performance
These Linear-rate coil springs provide two inches of lift and improves your on- and off-road ride quality. The slightly higher than stock spring rate helps with load bearing capacity while increasing ride height to clear larger tires. When used in conjunction with ICON's rear 2.0 Aluminum Series or 2.5 Series shocks, the ride quality and performance is unbeatable.

Additional Fitment Information:

Vehicle	Position	Sub Model
2016 - Lexus GX460	Rear	Base

5 In Stock

$399.65 CAD

$479.58 CAD

Brand	ICON Vehicle Dynamics
Part #	I4352700
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Control Arm Kit - Rear Upper ICON Vehicle Dynamics

2007-2014 FJ CRUISER/2003-UP 4RUNNER BILLET UPPER TRAILING ARM KIT
07-UP FJ/03-UP 4RNR/03-UP GX BILLET UPPER TRAILING ARM KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Bushings Included: Yes
- Control Arm Material: Aluminum
- Control Arm Construction: Billet
- Grease Fitting Included: Yes
- Adjustable: Yes
- Pre-Greased: No
- Title: 07-up Fj/03-up 4rnr/03-up Gx Billet Upper Trailing Arm Kit
- Bushing Material:
  - Polyurethane
  - Rod End Bearing
- Service Parts: 614510 - 54100 Bushing And Sleeve Kit
Features:
- CNC machined, billet aluminum construction
- Chemical etched, clear anodized finish for corrosion resistance
- On-vehicle adjustability using ICON's pinch housing and double adjuster
- 3/4" Rod End and Polyurethane Pivots, for excellent strength and longevity
- High Misalignment Spacers for Excellent Articulation
These Billet Aluminum Upper Link Arms for the Toyota FJ Cruiser/4Runner are a great replacement for weak Factory Upper Links. These links are light and strong. They include a 3/4" Rod End that have a load rating of over 20,000lbs of pressure. These links use a greaseable polyurethane bushings for a smooth ride with minimal deflection.

Additional Fitment Information:

Vehicle	Position
2016 - Lexus GX460	Rear Upper

4 In Stock

$927.30 CAD

$1,112.76 CAD

Brand	ICON Vehicle Dynamics
Part #	I4354100
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Shock Absorber Dust Cover - Rear Lower ICON Vehicle Dynamics

ICON’s Rear Lower Shin Guard protects shocks against dragging on rocks and other obstacles preventing premature wear of the shaft. Stainless steel construction guards against exposure to the elements and road debris.
07-14 FJ/03-23 4RUNNER/22-23 TUNDRA/23 SEQUOIA REAR SHIN GUARDS
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Title: Icon 03-23 4runner/07-14 Fj Cruiser/22-23 Tundra/23 Sequoia Rear Shin Guards
Features:
- 12 Gauge 304 Stainless Steel Contruction
- Shock Mount Molded Design Maintains Clearance & Will Work with most Aftermarket Rear Shocks
- T.I.G. Welded Joints for Strength and Aesthetics
- ICON’s “Shin Guard” design Protects against debris from Prematurely Wearing the Shock’s Shaft, which will Increase Longevity
This Rear Lower Shock Shin Guard is made out of 304 stainless steel. This guard prevents your rear shocks from dragging on rocks and other obstacles while on your off-road adventures. The Shin Guard design helps prevent debris from prematurely wearing your shock's shaft which will prolong the shocks life. Stainless steel was our first choice for this piece because it is exposed to the elements and road debris more than any other part of the rear suspension. The hardened stainless will prevent corrosion and will not gouge like common steel skids.

Additional Fitment Information:

Vehicle	Position
2016 - Lexus GX460	Rear Lower

2 In Stock

$209.78 CAD

$251.74 CAD

Brand	ICON Vehicle Dynamics
Part #	I4356100
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Shock Absorber - Rear ICON Vehicle Dynamics

Used with 1 (in) to 3 (in) Lift
ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.0 VS IR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: Yes
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 07-up Fj/03-up 4rnr/03-up Gx 1-3" Rear 2.0 Vs Ir
- Bushing Material:
  - Polyurethane
  - Rubber
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252004 - Economy Needle Charging Tool
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: No
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective suspension upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Sub Model
2016 - Lexus GX460	Rear	Base

12 In Stock

$354.35 CAD

$425.22 CAD

Brand	ICON Vehicle Dynamics
Part #	I4356505
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Shock Absorber - Rear ICON Vehicle Dynamics

Used with 1 (in) to 3 (in) Lift
ICON VS 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved performance. These shocks feature remote reservoirs, are vehicle specific, 100% rebuildable/revalveable.
07-14 FJ/03-UP 4 RUNNER 1-3" REAR 2.0 VS RR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Dust Shield: No
- Upper Mount Type: Stem
- Bushing Included: Yes
- Coil Over Springs Included: No
- Body Diameter: 2
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Bushing Color: Black
- Gas Charged: Yes
- Boot Included: Yes
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: No
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 07-14 Fj/03-up 4 Runner 1-3" Rear 2.0 Vs Rr
- Bushing Material:
  - Polyurethane
  - Rubber
- Service Parts:
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 254101g - 1/2 Gallon Icon Performance Shock Oil
- Remote Reservoir: Yes
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with remote reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- Application-specific reservoir mounting hardware
- 6063 anodized aluminum body and reservoir tubing for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.

Additional Fitment Information:

Vehicle	Position	Sub Model
2016 - Lexus GX460	Rear	Premium

3 In Stock

$563.28 CAD

$675.94 CAD

Brand	ICON Vehicle Dynamics
Part #	I4356505R
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Shock Absorber Set - Rear ICON Vehicle Dynamics

Used with 1 (in) to 3 (in) Lift Also Requires Part Number 56110
ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.5 VS RR CDCV PAIR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Cylinder Color: Silver
- Upper Mount Type: Stem
- Tube Outside Diameter: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- Boot Included: No
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 07-up Fj/03-up 4rnr/03-up Gx 1-3" Rear 2.5 Vs Rr Cdcv Pair
- External Reservoir: Yes
- Bore Diameter: 2.25
- Service Parts:
  - 191016 - 7.5" Finned Resi Upgrade Kit
  - 252001 - 2.5 Fixed Spanner Wrench
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252003 - Seal Install Tool 2.5/3.0
  - 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
  - 254100g - 1 Gallon Icon Performance Shock Oil
  - 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
  - 611007 - 9/16 Medium Duty Stem Bushing Kit
- Shaft Diameter: 0.875
Features:
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 100% Rebuildable
- 100% Revalveable
ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the Omega Series bypass shocks.

Additional Fitment Information:

Vehicle	Rear Spring	Position	Sub Model
2016 - Lexus GX460	Air	Rear	Luxury

3 In Stock

$2,658.15 CAD

$3,189.78 CAD

Brand	ICON Vehicle Dynamics
Part #	I4357810CP
Condition	New
Warehouse	B

2016 Lexus GX460 Coilover Spring and Shock Assembly - Front ICON Vehicle Dynamics

Requires Aftermarket front Upper Control Arms Raises Front 0 (in) - 3.5 (in)
These extended-travel ICON VS 2.5 Series coilovers offer increased wheel travel but also require the installation of aftermarket upper control arms. They are vehicle specific, 100% rebuildable, and 100% revalveable.
10-UP FJ/4RNR/10-UP GX EXT TRAVEL 2.5 VS RR CDCV COILOVER KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Grade Type: Performance
- Damping Type: Oil
- Adjustable Damping: Yes
- Service Parts:
  - 191016 - 7.5" Finned Resi Upgrade Kit
  - 252001 - 2.5 Fixed Spanner Wrench
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252003 - Seal Install Tool 2.5/3.0
  - 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
  - 254100g - 1 Gallon Icon Performance Shock Oil
  - 257301 - 7/8 Shaft 10.25 Oal, 6.00 Travel
  - 611019 - Coilover Hardware Kit Pair
  - 611067 - Tacoma/fj/4rnr Lower Co Brg/spcr Kit
- Shaft Diameter: 0.875
- Dust Shield: No
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Spring Rate: 650
- Upper Mount Type: Mounting Plate
- Coil Over Springs Included: Yes
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Body Diameter: 2.5
- Gas Charged: Yes
- Spring Color: Black
- Boot Included: No
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable Height: Yes
- Shock Absorber Body End Measuring Point: Top Of Upper Mount Plate
- Title: 10-up Fj/4rnr/10-up Gx Ext Travel 2.5 Vs Rr Cdcv Coilover Kit
- Spring Material: Steel
- Remote Reservoir: Yes
- OEM Wheels & Tires Fitment: Yes
Features:
- Adjustable coilovers yield 0-3.5" of front lift height
- Increased wheel travel and vehicle specific valving provides unrivaled ride quality across a wide range of on and off-road use
- Extended Travel length requires installation of aftermarket front upper control arms
- Superior low speed control reduces body roll and increases on-road stability
- External reservoir to attain cooler operating temperatures during extended off-road use
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- High quality ICON-engineered coil springs guaranteed for life against sagging or breaking
- Corrosion resistant CAD plated shock body with 7/8" shaft
- FK Rod End bearings provide extended longevity and minimal deflection
- Fully serviceable design allows for revalves, rebuilds, and an immeasurable service life
- Bolt-in design makes for an easy install into OEM shock location
The ICON Vehicle Dynamics V.S. 2.5 Series remote reservoir coilover shocks are an incredible upgrade for the front end of the Toyota FJ Cruiser, 4Runner, and Lexus GX platforms. ICON’s Vehicle-specific valving provides a sport tuned feel on and off-road while offering 0-3.5” of lift height adjustability for use of larger, more aggressive wheel and tire combinations. ICON's larger 2.5” shock body and increased piston area over stock components provides improved damping ability and outstanding ride characteristics across varying types of terrain. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. The ICON CDC Valve upgrade is included for those desiring an easy way to tune the ride externally with 10 adjustment settings from soft to hard. These extended length versions offer increased wheel travel but also require the installation of aftermarket upper control arms in conjunction with the coilovers.

Additional Fitment Information:

Vehicle	Position
2016 - Lexus GX460	Front

2 In Stock

$3,437.63 CAD

$4,125.16 CAD

Brand	ICON Vehicle Dynamics
Part #	I4358747C
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Shock Absorber Set - Rear ICON Vehicle Dynamics

Used with 1 (in) to 3 (in) Lift
ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs, damping adjustability, and are 100% rebuildable/revalveable.
07-UP FJ/03-UP 4RNR/03-UP GX 1-3" REAR 2.5 VS RR CDCV PAIR
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Cylinder Color: Silver
- Upper Mount Type: Stem
- Tube Outside Diameter: 2.5
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Shaft Material: Chrome
- Boot Included: No
- Damping Type: Oil
- Lower Mount Type: Eyelet
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Adjustable: Yes
- Shock Absorber Body End Measuring Point: Shoulder Of Stem
- Title: 07-up Fj/03-up 4rnr/03-up Gx 1-3" Rear 2.5 Vs Rr Cdcv Pair
- External Reservoir: Yes
- Bore Diameter: 2.25
- Service Parts:
  - 191016 - 7.5" Finned Resi Upgrade Kit
  - 252001 - 2.5 Fixed Spanner Wrench
  - 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
  - 252003 - Seal Install Tool 2.5/3.0
  - 252011 - 2.5 Piggyback/remote Resi/bypass Rebuild Kit
  - 254100g - 1 Gallon Icon Performance Shock Oil
  - 257339 - 7/8 Shaft 13.25 Oal, 9.00 Travel
  - 611007 - 9/16 Medium Duty Stem Bushing Kit
- Shaft Diameter: 0.875
Features:
- ICON's CDC Valve technology allows for 10 levels of high-resolution compression adjustability with the turn of a knob
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with piggyback reservoir
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- 6061 aircraft grade aluminum CNC machined components
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- 100% Rebuildable
- 100% Revalveable
ICON Vehicle Specific (V.S.) 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. These shocks are configured specifically for each application in both length and damping tune. Like all ICON'S Shock Absorbers, V.S. 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON'S unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal Bump Zone that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom outs and controls the suspension when compressing at high velocity. The ICON CDC Valve is an externally adjustable valve that restricts oil flow into the reservoir which creates 10 levels of compression damping force ranges. If you are looking for a more user defined tune, consider looking into the Omega Series bypass shocks.

Additional Fitment Information:

Vehicle	Position	Sub Model
2016 - Lexus GX460	Rear	Base

3 In Stock

$2,658.15 CAD

$3,189.78 CAD

Brand	ICON Vehicle Dynamics
Part #	I4357810CP
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Control Arm Kit - Front Upper ICON Vehicle Dynamics

2007-2014 FJ CRUISER/2003-UP 4RUNNER/2003-UP GX470/460 TUBULAR UPPER CONTROL ARM WITH DELTA JOINT KIT
07-UP FJ/03-UP 4RNR/03-UP GX TUBULAR UCalifornia DJ KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushing Color: Black
- Bushings Included: Yes
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: No
- Pre-Greased: No
- Ball Joint Mounting Type: Press In
- Title: 07-up Fj/03-up 4rnr/03-up Gx Tubular Uca Dj Kit
- Bushing Material: Polyurethane
- Service Parts:
  - 614504 - 58450 / 58451 Replacement Bushing And Sleeve Kit
  - 614519 - Delta Joint Install Press Adapter Tube
- OEM Wheels & Tires Fitment: Yes
Features:
- Serviceable Dual Stage Bushings
- CNC Machined Bushing Housings and Sleeves
- Built-In Caster Correction
- Black Semi-Gloss Powder Coat Finish
- ICON Delta Joint
- 1026 DOM Steel Construction
- CNC Bent Tubing
Take the performance of your Toyota 4Runner, FJ Cruiser, or Lexus GX to new levels with the ICON Vehicle Dynamics Delta Joint tubular upper control arm kit. All ICON tubular upper control arms are constructed from CNC bent 1026 DOM steel tubing and then powder coated to a semi-gloss black finish for maximum strength and corrosion resistance. ICON upper control arms are engineered with built-in caster correction for optimal alignment specifications and confidence inspiring handling. A main benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers, this translates into superior performance and ride quality for your vehicle. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.

Additional Fitment Information:

Vehicle	Position
2016 - Lexus GX460	Front Upper

7 In Stock

$1,359.01 CAD

$1,630.81 CAD

Brand	ICON Vehicle Dynamics
Part #	I4358451DJ
Condition	New
Warehouse	B

2016 Lexus GX460 Suspension Control Arm Kit - Front Upper ICON Vehicle Dynamics

ICON billet UCAs are made from CNC machined 6061 aluminum and feature PTFE-lined rod ends and ICON’s Delta Joint, a hardcore high-angle ball joint that combines the durability of a ball joint with the performance of a traditional uniball.
07-UP FJ/03-UP 4RNR/03-UP GX BILLET UCalifornia DJ KIT
Product Attributes:
- California Proposition 65: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer, And Birth Defects Or Other Reproductive Harm.
- Recommended Aftermarket Tires: 33" X 11.50" (larger Tires May Fit But Fender Trimming And Modifications Will Be Required)
- Ball Joint Included: Yes
- Recommended Aftermarket Wheels:
  - Icon Alloys | 17x8.5" W/ 4.75” Backspace / 0mm Offset
  - Icon Alloys | 18x9" W/ 5” Backspace / 0mm Offset
  - Icon Alloys | 20x9" W/ 5” Backspace / 0mm Offset
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: Pair
- Bushings Included: Yes
- Ball Joint Stud Type: Threaded
- Control Arm Construction: Tubular
- Grease Fitting Included: Yes
- Adjustable: Yes
- Pre-Greased: No
- Suspension Grade Type: Performance
- Ball Joint Mounting Type: Press In
- Title: 07-up Fj/03-up 4rnr/03-up Gx Billet Uca Dj Kit
- Bushing Material: Rod End Bearing
- Service Parts: 614520 - Delta Joint Install Adapter And Shim
- OEM Wheels & Tires Fitment: Yes
Features:
- ICON Delta Joint
- CNC Machined 6061 Billet Aluminum Construction
- Quality PTFE-lined ¾” FK Rod Ends
- On-Vehicle Adjustable For Quick And Precise Alignment
- Caster and Camber Adjustability Allows For Fine Tuning Of Vehicle Handling
- Matte Anodized Finish Provides Exceptional Corrosion Resistance
- O-ring Sealed Delta Joint Cover Cap For Additional Protection From The Elements
Take the performance of your Toyota 4Runner, FJ Cruiser, or Lexus GX to new levels with the ICON Vehicle Dynamics Delta Joint billet aluminum upper control arm kit. All ICON billet upper control arms are constructed from CNC machined 6061 aluminum and then finished in a matte anodization process for maximum strength and corrosion resistance. ICON billet aluminum upper control arms feature quality PTFE-lined rod ends and machined adjuster sleeves that allow for on-vehicle alignment adjustment and precision caster and camber tuning. Another major benefit of ICON upper control arms is the potential for increased wheel travel when paired with our extended travel coilovers. The additional droop travel provided by these components translates into superior performance and ride quality for your vehicle. These upper control arms feature ICON's patented Delta Joint. The Delta Joint is a heavy duty high angle ball joint that combines the durability of a ball joint with the performance characteristics of a traditional uniball. While the industry standard uniball does a great job of allowing the control arms of a vehicle to articulate with little bind, they do have an inherent weakness that leaves more to be desired when used in a daily driven application - exposure to the elements. The Delta Joint features a zinc plated housing providing the first layer of corrosion resistance, while a tough grease seal keeps potentially harmful elements out of the inner workings of the joint. Metal on metal construction and a greasable design increase the longevity of the Delta Joint while at the same time allowing for noise-free operation. What makes the Delta Joint unique is that it brings the best of both worlds to ICON upper control arms with features that make it more robust than a uniball, and at the same time capable of greater angularity than a typical ball joint.