1997 Mazda MagnaFlow Performance Exhaust Parts

Choose a Model for your 1997 Mazda


Showing 1 - 10 of 24 products
Image
SKU
Product
Rating
Price

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • 49 State; Standard Series; Overall L-17 in.; O2 Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA California Emissions Equipped Vehicles Registered Outside of California~Federal Emission Equipped
  • Direct-Fit Catalytic Converter
  • Direct Fit Catalytic Converter
  • Product Attributes:
    • Oxygen Sensor Location: Pre And Post Converter
    • Exhaust Pipe Material: Stainless Steel
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: No
    • Heat Shield Attached: No
    • Overall Length: 17.000 In.
    • Subtitles: Federal / Epa Compliant
    • Inlet Inside Diameter: Oem
    • Outlet Outside Diameter: Oem
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Converter Body Size: Oem
    • Heat Shield Included: Yes
    • Exhaust Component Mount Type: Uses Factory Hangers
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Core Substrate Material: Ceramic
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Bolt-on
  • Features:
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.

This Part Fits the Following OEM/Substitute Numbers:
F32Z 5E212-A, F62Z 5E212-A, F62Z 5E212-B, F62Z 5E212-E, FS49-20-600, FS4920600, FSC1-20-600, FSC120600, FSC5-20-600, FSC520600

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
1997 - Mazda 626 L 1991 Rear 4 Cyl 2.0L DX -

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • Heavy Metal Series; 2.25in. Tubing; 2.25in. Inlet/Outlet; Overall L-47.125in.; O2Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct-Fit Catalytic Converter
  • Direct Fit Catalytic Converter
  • Product Attributes:
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: No
    • Body Width: 5.625 In.
    • Outlet Attachment Type: Bolt-on
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Heat Shield Included: Yes
    • Exhaust Component Mount Type: Uses Factory Hangers
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • Body Length: 12.000 In.
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Inlet Connection Type: Bolt-on
    • Oxygen Sensor Location: Pre And Post Converter
    • Exhaust Pipe Material: Stainless Steel
    • Outlet Connection Type: Bolt-on
    • Heat Shield Attached: No
    • Overall Length: 47.125 In.
    • Subtitles: Federal / Epa Compliant
    • Inlet Inside Diameter: 2.250 In.
    • Outlet Outside Diameter: 2.250 In.
    • Main Piping Diameter: 2.250 In.
    • Converter Body Size: Oem
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Core Substrate Material: Ceramic
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Bolt-on
    • Outlet Type: Bolt-on
  • Features:
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.

This Part Fits the Following OEM/Substitute Numbers:
ZZMA-20-500A, ZZMA20500A, ZZMB-20-500A, ZZMB20500A, ZZN0-20-500, ZZN020500, ZZN2-20-500, ZZN220500

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 - Mazda B2300 L - Front 4 Cyl 2.3L 140

MagnaFlow Performance Exhaust
  • HM Grade Direct-Fit Catalytic Converter
  • Heavy Metal Series; Overall L-24.25 in.; O2 Sensor Location Pre/Post Convt.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct-Fit Catalytic Converter
  • Direct Fit Catalytic Converter
  • Product Attributes:
    • Oxygen Sensor Location: Pre And Post Converter
    • Exhaust Pipe Material: Stainless Steel
    • WARNING CA Proposition 65: No
    • Heat Shield Attached: No
    • Overall Length: 24.250 In.
    • Subtitles: Federal / Epa Compliant
    • Inlet Inside Diameter: Oem
    • Outlet Outside Diameter: Oem
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Converter Body Size: Oem
    • Heat Shield Included: Yes
    • Exhaust Component Mount Type: Uses Factory Hangers
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Core Substrate Material: Ceramic
    • Inlet Type: Bolt-on
    • Air Tube Adaptable: No
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Bolt-on
  • Features:
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. While the majority of the Direct-Fit Catalytic Converter products do not require welding; cutting or bending; limited applications may require additional welding for optimal installation.

This Part Fits the Following OEM/Substitute Numbers:
JE96-20-500A, JE9620500A, JEC4-20-500, JEC420500

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 - Mazda MPV V 2954 Front 6 Cyl 3.0L 180

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter-2.50in.
  • Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
  • Universal Catalytic Converter-2.50in.
  • 94100 Series OBDII Compliant Universal Catalytic Converter
  • Product Attributes:
    • Inlet Diameter: 2.500 In.
    • WARNING CA Proposition 65: No
    • Body Width: 5.500 In.
    • Outlet Attachment Type: Weld-on
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Heat Shield Included: Yes
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • Body Length: 9.000 In.
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Outlet Diameter: 2.500 In.
    • Oxygen Sensor Location: None
    • Heat Shield Attached: Yes
    • Overall Length: 13.000 In.
    • Subtitles: Federal / Epa Compliant
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
    • Main Piping Diameter: 2.500 In.
    • Converter Body Size: Oem
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Body Shape: Oval
    • Core Substrate Material: Ceramic
    • Sensor Port Count: 0
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Weld-on
    • Outlet Type: Weld-on
  • Features:
    • A Shorter Version Of The 94000 Series
    • w/Matching Coverage
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • All 49 State catalytic converters meet EPA requirements. 49-State catalytic converters are not legal for sale; installation; or use on licensed vehicles in the state of California.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 - Mazda B3000 V 2986 Front 6 Cyl 3.0L 182

MagnaFlow Performance Exhaust
  • Standard Grade Universal Catalytic Converter-2.50in.
  • Standard Series; 2.5 in. Tubing/Inlet/Outlet; Overall L-13.00 in.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Cutting And Welding Required During Installation
  • Universal Catalytic Converter-2.50in.
  • 94100 Series OBDII Compliant Universal Catalytic Converter
  • Product Attributes:
    • Inlet Diameter: 2.500 In.
    • WARNING CA Proposition 65: No
    • Body Width: 5.500 In.
    • Outlet Attachment Type: Weld-on
    • Recommended Use: Converter
    • Body Material: Stainless Steel
    • Heat Shield Included: Yes
    • Inlet Type: Weld-on
    • Air Tube Adaptable: No
    • Body Length: 9.000 In.
    • California Air Resources Board (CARB): No
    • Catalytic Converter Format: Pre-catalytic Converter And Main Catalytic Converter
    • Outlet Diameter: 2.500 In.
    • Oxygen Sensor Location: None
    • Heat Shield Attached: Yes
    • Overall Length: 13.000 In.
    • Subtitles: Federal / Epa Compliant
    • Body Type: Clam Shell
    • Heat Shield Material: Aluminized Steel
    • Inlet Inside Diameter: 2.500 In.
    • Outlet Outside Diameter: 2.500 In.
    • Main Piping Diameter: 2.500 In.
    • Converter Body Size: Oem
    • Catalytic Converter Air Tube Adapter: Not Air Tube Kit Adaptable
    • Body Shape: Oval
    • Core Substrate Material: Ceramic
    • Sensor Port Count: 0
    • Emission: Non-california (49-state)
    • Inlet Attachment Type: Weld-on
    • Outlet Type: Weld-on
  • Features:
    • A Shorter Version Of The 94000 Series
    • w/Matching Coverage
    • Stainless Steel Construction
    • Federal Emissions Compliant Designed
    • Meets EPA Requirements
  • All 49 State catalytic converters meet EPA requirements. 49-State catalytic converters are not legal for sale; installation; or use on licensed vehicles in the state of California.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 - Mazda B3000 V 2986 Rear 6 Cyl 3.0L 182

MagnaFlow Performance Exhaust
  • Heavy Metal Series; 2.25in. Tubing; 2.25in. Inlet/Outlet; Overall L-47.125in.; O2Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct Fit Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 - Mazda B2300 L - Front 4 Cyl 2.3L 140

MagnaFlow Performance Exhaust
  • 49 State; Standard Series; Overall L-17 in.; O2 Sensor Location Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In CA Federal Emission Equipped~California Emissions Equipped Vehicles Registered Outside of California
  • Direct Fit Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
1997 - Mazda 626 L 1991 Rear 4 Cyl 2.0L DX -

MagnaFlow Performance Exhaust
  • Standard Series; 2.25 in. Tubing; 2.25 in. Inlet/Outlet OD; Overall L-16 in.; O2 Sensor Loc. Pre/Post Convt; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct Fit Catalytic Converter

This Part Fits the Following OEM/Substitute Numbers:
BPE8-20-600, BPE820600, BPS1-20-600, BPS120600

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 - Mazda Miata L 1839 Front 4 Cyl 1.8L -

MagnaFlow Performance Exhaust
  • Heavy Metal Series; Overall L-5.00 in.; O2 Sensor Location Pre/Post Conv.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct Fit Catalytic Converter

This Part Fits the Following OEM/Substitute Numbers:
B6GD-20-500C, B6GD20500C, Z502-20-500, Z50220500

Additional Fitment Information:
Vehicle Block CC Position Engine Sub Model CID
1997 - Mazda Protege L 1489 Front 4 Cyl 1.5L DX -

MagnaFlow Performance Exhaust
  • Heavy Metal Series; Overall L-24.25 in.; O2 Sensor Location Pre/Post Convt.; Not Air Tube Kit Adaptable;Not Legal For Sale Or Use On Vehicles Registered In California
  • Direct Fit Catalytic Converter

Additional Fitment Information:
Vehicle Block CC Position Engine CID
1997 - Mazda MPV V 2954 Front 6 Cyl 3.0L 180
Showing 1 - 10 of 24 products

Loading...